Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw on molded part | Item 3 | Tightening torque | 3.0 Nm (2 ftlb.) | ||
|
Front convertible top rooflining |
|||||
| Fastening screw on clamp | Item 4 | Tightening torque | 1.5 Nm (1 ftlb.) | ||
|
Front convertible top rooflining |
|||||
| Fastening screw on guide cable | Item 2 | Tightening torque | 9.7 Nm (7.5 ftlb.) | ||
|
Rear convertible top rooflining connection |
|||||