LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 610119 Removing And Installing Convertible Top (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Convertible Top

Installing Convertible Top

  1. Check fixing clips for damage and replace them if necessary.
    Fig 1: Checking Fixing Clips
    G09994388Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully fit the convertible top on the fixing clips with the help of another person.

    Further installation is performed in reverse order to removal. 

  3. Fastening screw for convertible top support. Tightening torque 23 Nm (17 ftlb.) 
  4. Fastening screw for rear side window. Tightening torque 9.7 Nm 
  5. Fastening screw for hydraulic cylinder. Tightening torque 9.7 Nm (7.5 ftlb.) 
scientia non olet · About LEMON Manuals