Installing Sun Blind

Information 

If the electric drive for the sun blind was removed, make sure that the sun blind carriers at the left and right are parallel to each other. The sun blind coupling must be moved out of the guide rail.

1. Insert sun blind carrier -1-  into the sun blind coupling -4- from above.
   Fig 1: Inserting Sun Blind Carrier

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Slide sun blind carrier -1-  into the guide rail -2-  .
   Fig 2: Identifying Sun Blind Carrier And Guide Rail

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Engage fabric centering device -1-  at the retaining clip for the guide tube -2-  .
   Fig 3: Installing Fabric Centering Device

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Move sun blind motor to the Close position manually -B-  .
   Fig 4: Positioning Sun Blind Manually

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Position sun blind well -2-  and secure with a fastening screw -1-  .
   Fig 5: Positioning Sun Blind Well

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Position transverse bow and secure with a fastening screw -1-  .

   Fig 6: Securing Fastening Screw Of Transverse Bow

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Fastening screw for transverse bow. Tightening torque 2.5 Nm (2 ft. lbs.)