Installing Seal For Roof Assembly

Information 

• Immediately before sticking on, wash off the areas on which you intend to stick the seal using isopropyl to ensure that all traces of silicone, grease and oil are completely removed. 

1. Position the seal.
2. The lug -1-  of the protective film must be facing outwards.
3. Pull off protective film -1-  parallel to the body.
   Fig 1: Pulling Off Protective Film

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Check that the seal is fitted correctly.
5. Press on the seal from the roof side using a plastic wedge.