LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 60 - Sliding Roof, Tilting Roof -- 911 CARRERA (991) >> WM 604019 Removing And Installing Sliding Roof Panel (All Models) >> Removing Sliding Roof Panel

Removing Sliding Roof Panel

Information 

If the support rails on the sliding-roof panel have become detached or are damaged, the sliding-roof panel must be replaced.

Support rails must not be repaired or stuck.

Fig 1: Identifying Sliding-Roof Panel Position
G09994340Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Move panel into ventilation position.
  2. Loosening the rear lid.
    1. 2.1. Unscrew rear fastening screws on the lid -1-  .
      Fig 2: Identifying Rear Fastening Screws
      G09994341Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Open lid.
    1. 3.1. Open lid ca. 15 cm.
    2. 3.2. Unscrew center and front fastening screw -1-  .
      Fig 3: Identifying Fastening Screws
      G09994342Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Lift off lid.