Removing Mounting Unit

Fig 1: Identifying Mounting Unit Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pull wiring harness -1- out of the guide rail -2- .

Fig 2: Identifying Wiring Harness For Electric Drive
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew and remove fastening screws for outer -1- and inner front mounting unit -2- .

Fig 3: Removing Front Mounting Unit
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew and remove fastening screws for rear mounting unit -1- .
1. 3.1. Unscrew and remove fastening screw -2- securing retaining bracket -3- to drive pipe.
  
  Fig 4: Identifying Rear Mounting Unit
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Information
  
  Secure square nut to prevent it from falling down.
Unscrew and remove fastening screws -1- securing mounting unit to assembly frame at the sides

Fig 5: Identifying Frame Mounting Assembly
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove safety clip -1- .

Fig 6: Identifying Safety Clip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove metal clip -1- using a suitable tool.

Fig 7: Identifying Metal Clip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Lift mounting unit -1- up and out -arrow- .

Fig 8: Lifting Out Mounting Unit
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull mounting unit -1- with drive shaft forward and remove it -arrow- .

Fig 9: Pulling Out Mounting Unit
Courtesy of PORSCHE CARS NORTH AMERICA, INC.