Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Gap Between Front Roof Pillar And Roof | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Front Roof Pillar With Respect To Roof | Only Install Lowered (B) | Gap Dimension | 0 mm | -1 mm | |
|
Gap Between Front Cover And Side Panel |
|||||
| Gap Between Rear Roof Pillar And Roof | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Rear Roof Pillar With Respect To Roof | Only Install Lowered (B) | Gap Dimension | 0 mm | -1 mm | |
|
Gap Between Rear Cover And Side Panel |
|||||
| Fastening Nuts For Roof Assembly | Tightening Torque | 10 Nm (7.5 ft. lbs.) | |||
|
Fastening Nuts On Roof Assembly |
|||||
| Windshield To Roof, Front, Outer | D | Length | 40 mm | ||
| Front Roof Cover, Centre Axis/Right | B | Length | 300 mm | ||
| Front Roof Cover, Centre Axis/Left | C | Length | 100 mm | ||
| Windshield To Roof | A (Full Roof) | Length | 120 mm | ||
| Roof Pillar To Rear Roof | A | Length | 45 mm | ||
| Rear Window To Rear | B | Length | 30 mm | ||