Removing Rear Spoiler
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle .
- Open rear lid and guide out rear cover.
- Press in cover -1- at the left and right side -arrow- and push it downwards.
- Unscrew and remove fastening screws -1- at the left and right.
- Press upper part of rear spoiler forward and remove it from the bracket.
- Remove engine-compartment blower. → 198119 REMOVING AND INSTALLING ENGINE-COMPARTMENT BLOWER
- Unscrew and remove fastening screw -1-
on lower part of spoiler, push it forward and disengage it from the retaining lugs.
Lift up lower part of spoiler.
- Release plug connections and disconnect connectors.
- Remove lower part of spoiler by pulling it up.
- Remove tail lights. → 943119 REMOVING AND INSTALLING TAIL LIGHT
- Unscrew and remove fastening screw on mounting bracket for rear spoiler at the side -1- and along the rear apron -2- .
- Swivel out mounting bracket in an upward direction.
- Remove mounting bracket for rear spoiler.