LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 911 CARRERA (991) >> WM 665819 Removing And Installing Rear Spoiler (Turbo, Turbo S, Turbo CABRIO, Turbo S CABRIO) >> Installing Rear Spoiler

Installing Rear Spoiler

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw on rear spoiler module to until secure.
  3. Tighten fastening screw on rear apron to Tightening torque 3.2 Nm (2 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)  until secure.
  4. Tighten fastening screw on lower part of spoiler to until secure.
  5. Tighten fastening screw on upper part of rear spoiler to until secure.
scientia non olet · About LEMON Manuals