Installing Rear Spoiler

Installation is performed in reverse order to removal.

1. When installing the spoiler, make sure that the guide pin is inserted into the guiding groove.
   Fig 1: Inserting Guide Pin

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fastening screw securing rear spoiler to rear apron. Tightening torque 3.2 Nm (2 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.) 

   Fastening screw securing support plate to body. Tightening torque 23 Nm (17 ftlb.)