LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 911 CARRERA (991) >> WM 665619 Removing And Installing Ventilation Grille For Lid (Upper) (Gt3 RS) >> Installing Ventilation Grille For Lid (Upper)

Installing Ventilation Grille For Lid (Upper)

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Install additional brake light. → 947019 REMOVING AND INSTALLING ADDITIONAL BRAKE LIGHT
  2. Tighten fastening screws at the bottom of the rear lid to the specified torque. Tightening torque 5.6 Nm (4.5 ftlb.) 
  3. Tighten fastening screws at the back of the rear lid to the specified torque. Tightening torque 5.6 Nm (4.5 ftlb.) 
scientia non olet · About LEMON Manuals