LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 911 CARRERA (991) >> WM 665619 Removing And Installing Ventilation Grille For Lid (Rear) (Gt3 RS) >> Installing Ventilation Grille For Lid (Rear)

Installing Ventilation Grille For Lid (Rear)

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws on underside of rear lid Item 1  to the specified torque. Tightening torque 5.6 Nm (4.5 ftlb.) 
  2. Tighten fastening screws on underside of rear lid Item 2  to the specified torque. Tightening torque 4 Nm (3 ftlb.) 
  3. Tighten fastening screws between the grille and retaining frame to the specified torque. Tightening torque 5.6 Nm (4.5 ftlb.) 
scientia non olet · About LEMON Manuals