Removing Roof Joint Cover Strip

Fig 1: Identifying Roof Joint Cover Strip Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Wear personal protective gear.

1. Cover accessories adjacent to the repair area on the vehicle.
2. Pull out the seal -1-  .
   1. 2.1. Remove adhesive residue if necessary.
      Fig 2: Removing Seal

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Cut plastic clamp -1-  on the seal at the front and rear using a suitable tool.
   Fig 3: Cutting Plastic Clamp

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 3.1. Remove plastic component you have just cut off.