Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Targa bar to glass dome (G1) | Gap dimension | 6.3 mm | +/-0.5 mm | ||
|
Gap dimension: Targa bar to glass dome |
|||||
| Targa bar to glass dome (G2) | Gap dimension | 6.3 mm | +/-0.5 mm | ||
|
Gap dimension: Targa bar to glass dome |
|||||
| Trim panel on sides of Targa bar to trim panel flap (B1) | Gap dimension | 2 mm | +/-0.8 mm | ||
|
Gap dimension: Trim panels on Targa bar |
|||||
| Trim panel flap to center trim panel on Targa bar (B2) | Gap dimension | 3 mm | +/-0.8 mm | ||
|
Gap dimension: Trim panels on Targa bar |
|||||