Removing Door Entry Guard

Fig 1: Identifying Door Entry Guard Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew and remove fastening screw -1- on front wheel housing liner.

Fig 2: Removing Front Door Entry Guard
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release and remove fastening screws -1- on the underside.

Fig 3: Releasing Fastening Screws On Underside
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew and remove rear fastening screw -1- on the underside.

Fig 4: Removing Rear Fastening Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew and remove rear fastening screw -1- .

Fig 5: Removing Fastening Screw For Wheel Housing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Starting at the rear, pull door entry guard -1- out of the fixing clips -2- .

Fig 6: Removing Door Entry Guard
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check fixing clips and fastening clamps and replace them if necessary.