LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 911 CARRERA (991) >> WM 663119 Removing And Installing Door Entry Guard (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Installing Door Entry Guard

Installing Door Entry Guard

  1. Installation is performed in reverse order to removal.
  2. Check that the door entry guard is seated exactly. Check gaps and gap dimensions.
  3. Fastening screw on body, front. Tightening torque 3 Nm (2 ftlb.) 
  4. Fastening nut securing wheel housing liner to body. Tightening torque 3 Nm (2 ftlb.) 
  5. Fastening screw, rear, underside. Tightening torque 2 Nm (1.5 ftlb.) 
scientia non olet · About LEMON Manuals