Removing Spoiler Air Supply Module

Information 

Air hoses are color-coded and must not be interchanged.

Observe marking for insertion depth of hose connection.

Hoses must not be kinked.

Fig 1: Identifying Air Supply Module Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Unclip air deflection vane -1-  and swivel it downwards.
   Fig 2: Removing Air Deflector Vanes

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Pull hose connections down through the opening and disconnect them at the hose connections -1-  .
   Fig 3: Disconnecting Hose Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Fold trim panel -1-  for luggage compartment at the right aside.
   Fig 4: Identifying Trim Panel For Luggage Compartment Trim

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Unscrew and remove fastening screws -1-  on the air supply module.
   Fig 5: Identifying Air Supply Module Fastening Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Fold module -1-  inwards, release electric plug connection and pull off connector -arrow-  .
   Fig 6: Removing Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Unclip air hose -1-  from the clips.
   Fig 7: Identifying Air Hose With Clips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
7. Carefully pull out air hoses with a rubber sleeve -1-  .
   Fig 8: Pulling Out Air Hose

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
8. Remove spoiler air supply module.