Install The Spoiler Air Supply Module

Information 

Air hoses are colour-coded and must not be interchanged.

Observe marking for insertion depth of hose connection.

Hoses must not be kinked.

1. Position air supply module -1-  into the cut-outs -2-  on the luggage compartment floor.
2. Feed air hoses -3-  through the bore in the body.
3. Fit rubber sleeve -4-  .
   1. 3.1. Pull the rubber sleeve -4-  by the tab -5-  into the bore.
   2. 3.2. The tab -5-  of the rubber sleeve -4-  must be aligned vertically upwards -arrow A-  , otherwise is the danger that air hoses -3-  are bent.
      Fig 1: Installing Air Supply Module

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Align the air hoses to the rubber sleeve using the markings.
5. Further installation is performed in reverse order to removal.
6. Check that the trim panel is fitted correctly.