Installing Front Spoiler

1. Installation is performed in reverse order to removal.

   → Tightening torque: 2.7 Nm (2 ftlb.)+/-0.2 Nm (+/-0.1 ftlb.) 

Installation is performed in reverse order to removal.

→ Tightening torque: 3.2 Nm (2 ftlb.)+/-0.6 Nm (+/-0.5 ftlb.) 

Guide all tabs into the front apron during installation. -arrow A- 

Following installation, check that the tabs -arrow B-  have engaged correctly.

Fig 1: Installing Front Spoiler

Courtesy of PORSCHE CARS NORTH AMERICA, INC.