LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 911 CARRERA (991) >> WM 637019 Removing And Installing Trim Frame For Tailpipe Cover (Gt3 & Gt3 RS) >> Installing Trim Frame For Tailpipe Cover

Installing Trim Frame For Tailpipe Cover

Installation is performed in reverse order to removal. Pay particular attention to the following: 

  1. Tighten fastening screws to the specified torque. Tightening Torque 2.5 Nm (2 ft. lbs.) 
scientia non olet · About LEMON Manuals