LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- 911 CARRERA (991) >> WM 558619 Removing And Installing Lower Part Of Rear Lid Lock (Lock) (Gt3 & Gt3 RS) >> Installing Lower Part Of Rear Lid Lock (Lock)

Installing Lower Part Of Rear Lid Lock (Lock)

Installation Is Performed In Reverse Order To Removal. Pay Particular Attention To The Following: 

  1. Tighten fastening screws on lower part of rear lid lock to the specified torque. Tightening Torque 9.7 Nm (7.5 ft. lbs.) 
scientia non olet · About LEMON Manuals