LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- 911 CARRERA (991) >> WM 558619 Removing And Installing Lower Part Of Rear Lid Lock (Cover) (All Models) >> Installing Lower Part Of Lid Lock

Installing Lower Part Of Lid Lock

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws for rear apron to the specified tightening torque Tightening Torque 3.2 Nm (2 ft. lbs.) +/-0.6 Nm (+/-0.5 ft. lbs.)  .
  3. Tighten fastening screw on cover for lower part of lid lock to the specified tightening torque.
scientia non olet · About LEMON Manuals