LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- 911 CARRERA (991) >> WM 553119 Removing And Installing Front Pneumatic Spring (All Models) >> Function Test On Pneumatic Spring

Function Test On Pneumatic Spring

  1. Open and close the lid several times to check function and assembly of the pneumatic spring.
  2. Open the lid fully. The pneumatic spring must hold the lid in its open position.
  3. Close the lid.
scientia non olet · About LEMON Manuals