Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Dimension Y | Distance | 35 mm | |||
| Dimension X | Distance | 35 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 10 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 3 mm |
For dimensions X and Y, refer to illustration.