LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front- 911 CARRERA (991) >> WM, 50561931 Removing And Installing Front Wheel Housing Liner (Front Part) >> Removing Front Wheel Housing Liner (Front Part) >> Installing Front Wheel Housing Liner (Front Part)

Installing Front Wheel Housing Liner (Front Part)

  1. Installation is performed in reverse order.
  2. Tighten upper part of front wheel housing liner (front part) to > Tightening torque 3 N.m (2 ft.lb). 
  3. Tighten air vane for front wheel housing liner (front part) to > Tightening torque 3 N.m (2 ft.lb)  .
  4. Tighten lower part of front wheel housing liner (front part) to > Tightening torque 3 N.m (2 ft.lb)  .
scientia non olet · About LEMON Manuals