LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front- 911 CARRERA (991) >> WM, 505619 Removing And Installing Front Wheel Housing Liner >> Installing Front Wheel Housing Liner >> Installing Front Wheel Housing Liner - Rear Section

Installing Front Wheel Housing Liner - Rear Section

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws securing wheel housing liner to the body to the specified tightening torque. > Tightening torque 3 N.m (2 ft.lb) 
  2. Tighten fastening nuts securing wheel housing liner to the body to the specified tightening torque. > Tightening torque 3 N.m (2 ft.lb) 
  3. Tighten fastening screws securing air vane to the body to the specified tightening torque. > Tightening torque 3 N.m (2 ft.lb) 
scientia non olet · About LEMON Manuals