LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front- 911 CARRERA (991) >> WM, 50551935 Removing And Installing Wing >> Removing Wing

Removing Wing

Installation position of wing

Fig 1: Wing Component Location
G14222871Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of wing

  1. Unscrew screw -1-  on the wing.
    G14222872Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw securing wing to retainer plate on headlight mounting

  2. Unscrew nut -2-  on the wing.
    G14222873Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Nut securing wing to retainer plate on headlight mounting

  3. Unscrew screws -1-  at the top of the wing.
    G14222874Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on top of wing

  4. Press pin out of expansion rivets -1-  in wing trim panel.
    G14222875Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Expansion rivets in wing trim panel

  5. Remove trim panel on wing by pulling it to the rear.
    G14222876Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wing trim panel

  6. Unscrew screws -1-  securing wing to retaining frame.
    G14222877Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws securing wing to retaining frame

  7. Unscrew screw -1-  at the bottom of the wing.
    G14222878Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw at bottom of wing

  8. Remove the wing.