Removing Wing
Installation position of wing
- Unscrew and remove fastening nuts -5- on the wing strut -4- and on the brackets -2- and -3- .
- Loosen wing strut -4-
from the wing -1-
.
Loosening bottom of wing
- Unclip electric plug connection on wire harness for front apron -3- from the wing.
- Unclip electric plug connection for antenna -1- from the wing.
- Unclip electric wire harness for airbag sensor -2-
from the wing.
Electric plug connections on wing
- Unscrew and remove fastening screws -8-
on the top of the wing.
Loosening top of wing
- Unscrew and remove fastening screws -9- on the A-pillar.
- Remove the wing -1-
.
Loosening wing from A-pillar