Installing Spring Strut Mount

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
• Do not begin bonding work until all materials and tools necessary for later repair work are available.

1. Apply adhesive. > Application depth 3.0 mm 

   Working with body structural adhesive

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE - SECTION ON "INFORMATION"

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

2. Rivet in spring strut mount. > BLIND RIVET 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Riveting in spring strut mount

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Riveting in spring strut mount