Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Side member connection point | Large cut | Length | 180 mm | ||
| Connection point for longitudinal member | Dimension X | Length | 125 mm | ||
| Side member connection point | Outer shell only | Length | 100 mm | ||
| Drill bit | Diameter | 9 mm | |||
| Drill bit | Diameter | 9 mm | |||
| Drill bit | Diameter | 6.5 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Bead of adhesive | Application depth | 5 mm | |||
| Threaded joint on side member | Tightening torque | 15 Nm (11 ftlb.) |