Preparing Front Side Member For Installation

Prepare bonding areas on the sub-part for bonding. → WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE (EXCEPT CARRERA "EDITION", CARRERA CABRIOLET "EDITION", CARRERA 4 "EDITION", CARRERA 4 CABRIOLET "EDITION")

Fig 1: Identifying Front Side Member Bonding Area (1 Of 3)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Front Side Member Bonding Area (2 Of 3)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 3: Identifying Front Side Member Bonding Area (3 Of 3)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.