LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front - 911 CARRERA (991) >> WM 505355 Replacing Wing Joining Plate (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Preparing Front Wing Joining Plate For Installation

Preparing Front Wing Joining Plate For Installation

  1. Fit wing joining plate and secure it to the body.
    1. 1.1. Drill bores for the rivets through the existing holes. → Diameter: 6.5 mm 
  2. Remove wing joining plate.
  3. Countersink bores for installing countersunk rivets. Countersink Nr.202 
  4. Prepare connection areas for bonding.
    Fig 1: Identifying Fit Wing Joining Plate Connection Areas For Bonding
    G10005278Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals