LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> 97 - Cables -- 911 CARRERA (991) >> WM 970919 Removing And Installing Main Wire Harness (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Removing Main Wire Harness >> On Vehicles With Porsche Doppelkupplung (PDK)

On Vehicles With Porsche Doppelkupplung (PDK)

  1. 4. Disconnect sub-part for PDK transmission. → 970955 REPLACING SUB-PART FOR PDK TRANSMISSION 
  2. 5. Disconnect main wire harness for rear lid.
    Fig 1: Identifying Main Wire Harness On Rear Lid
    G09999560Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 5.1. Disconnect plug connection for SDARS antenna. → 913819 REMOVING AND INSTALLING SDARS ANTENNA
    2. 5.2. Remove rubber sleeve -1-  .
    3. 5.3. Pull main wire harness at the rear lid into the body.
  3. 6. Remove main wire harness.
    1. 6.1. Make sure that all electric plug connections are released and unplugged.
    2. 6.2. Make sure that all brackets are unclipped and released.
    3. 6.3. Pull all sub-parts into the passenger compartment and remove main wire harness.