LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> 97 - Cables -- 911 CARRERA (991) >> WM 970909 Loosening And Securing Main Wire Harness In Front-End (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Loosening Main Wire Harness In Engine Compartment >> Loosening Main Wire Harness In Right Wheel Housing

Loosening Main Wire Harness In Right Wheel Housing

  1. Release and unplug electric plug connection for airbag sensor. → 695119 REMOVING AND INSTALLING AIRBAG SENSOR
  2. Release and unplug electric plug connection for electric fan for radiator. → 190819 REMOVING AND INSTALLING ELECTRIC FAN
  3. Release and unplug electric plug connection for wire harness for front ABS. → 976519 REMOVING AND INSTALLING WIRE HARNESS FOR ABS 
  4. Release and unplug electric plug connection for level sensor. → 947819 REMOVING AND INSTALLING FRONT ANGLE SENSOR FOR HEADLIGHT BEAM ADJUSTMENT
  5. Release and unplug electric plug connection for air-conditioning pressure switch. → 878319 REMOVING AND INSTALLING PRESSURE SWITCH
  6. Disconnect ground strap at the filler neck. → 200719 REMOVING AND INSTALLING FILLER NECK "
  7. Release and unplug electric plug connection for Tyre Pressure Monitoring (TPM) transmitter (trigger). → 443819 REMOVING AND INSTALLING TPM ANTENNA
  8. Disconnect wire harness in the right wheel housing.
    1. 8.1. Make sure that all electric plug connections on the wire harness in the right wheel housing are released and unplugged.
    2. 8.2. Make sure that all brackets are unclipped and released.
    3. 8.3. Pull wire harness in the right wheel housing through the spring-strut mount into the plenum panel.
scientia non olet · About LEMON Manuals