LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> 64 - Glazing, Window Control -- 911 CARRERA (991) >> WM 647119 Removing And Installing Rear Window Lifter (CABRIO) >> Installing Rear Window Lifter

Installing Rear Window Lifter

  1. Installation is performed in reverse order to removal.
  2. When installing the cover, make sure that the cover is fitted correctly in the guide.
  3. The tilt angle of the side window can be adjusted at the upper fastening points using spacer plates (991.543.561.0X).
    • S1 White
    • S2 Yellow
    • S3 Grey
    • S4 Green
    • S5 Blue
    • S6 Black
  4. Fastening nut for power windows mechanism at the bottom. Tightening torque 17 Nm 
  5. Fastening screw for power windows mechanism at the top. Tightening torque 9.7 Nm 
  6. Fastening screw for convertible top support. Tightening torque 23 Nm (17 ft. lbs.) 
scientia non olet · About LEMON Manuals