LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> 64 - Glazing, Window Control -- 911 CARRERA (991) >> WM 646919 Removing And Installing Inner Rear Window Channel Seal (CABRIO) >> Removing And Installing Inner Rear Window Channel Seal >> Removing Inner Rear Window Channel Seal

Removing Inner Rear Window Channel Seal

Fig 1: Identifying Inner Window Channel Seal
G09994843Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip seat belt cover -1-  by pulling it forward out of the guide clips -2-  .
    Fig 2: Removing Cover Of Three-Point Seat Belt
    G09994844Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unclip trim panel -1-  at the rear by pulling it up out of the guide.
    Fig 3: Removing Trim Panel
    G09994845Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Pull window channel seal up and remove it.