LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 - Seat Frames -- 911 CARRERA (991) >> WM 726319 Removing And Installing Locking Mechanism For Rear Backrest (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3 RS) >> Removing Locking Mechanism For Rear Backrest

Removing Locking Mechanism For Rear Backrest

  1. Fold the backrest forward.
  2. Remove cover on locking mechanism for backrest.
    Fig 1: Removing Cover On Backrest Locking Mechanism
    G09998296Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Carefully prise off actuating lever on locking mechanism for the backrest using a plastic wedge -arrow-  .
    2. 2.2. Unscrew fastening screw -1-  .
    3. 2.3. Pull cushion at the front away from the cover slightly.
      Fig 2: Removing Cover Of Backrest Locking Mechanism
      G09998297Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    4. 2.4. Unclip the retaining lugs -A-  and -B-  , which are now visible, and remove cover on the locking mechanism -C-  .
  3. Remove locking mechanism for backrest.
    Fig 3: Removing Backrest Locking Mechanism
    G09998298Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 3.1. Unscrew both fastening screws -1-  .
    2. 3.2. Unclip the locking mechanism -A-  and remove it -B-  .

      To do this, carefully lift up the cover on the backrest.