Removing Rear Backrest

Fold the backrest forward.
Remove centre bearing support cover.
1. 2.1. Pull up rear part of centre bearing support cover -1- and remove it -A- .
2. 2.2. Fold back backrest without locking it.
3. 2.3. Unclip front part of centre bearing support cover -2- and remove it -B- .
Fig 1: Removing Bearing Support Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove backrest.

Fig 2: Removing Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 3.1. Pull backrest towards the middle -A- , until the bearing is released in the bearing support.
2. 3.2. Remove backrest -B- .