Installing Front Camera

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

Information 

Do not touch the front camera lens!

1. Connect electric plug connection -1-  on the front camera -2-  (-a-  ) until it engages securely.
   Fig 1: Connecting Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Install front camera.
   • 2.1. Position front camera -1-  on the holder in such a way that the two retaining pins at the left -a-  and the retaining pin at the right -b-  make contact with the mounting points.
   • 2.2. Press front camera forward into the mounting points until the locks -2-  engage securely.

Fig 2: Installing Front Camera

Courtesy of PORSCHE CARS NORTH AMERICA, INC.