Removing Switch Console

Information 

Ignition switched off and ignition key removed before disconnecting or connecting load. 

1. Insert plastic wedge into the gap -arrows-  between the trim panel and keypad and carefully remove keypad.
   Fig 1: Removing Keypad

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Insert plastic wedge into the gap -arrows-  between the trim panel and switch console and carefully lift out switch console.
   Fig 2: Removing Switch Console

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Unplug electric plug connection for switch console -arrow-  .

Fig 3: Removing Switch Console Connector

Courtesy of PORSCHE CARS NORTH AMERICA, INC.