Installing Headliner
Information
Make sure that the roof cover does not buckle.
- Guide in the headliner.
- 1.1. Two people are needed in order to guide in the headliner.
- 1.1.1. Position of first person: Driver's door.
- 1.1.2. Position of second person: Passenger's door.
- 1.2. Guide the headliner into the vehicle through the passenger's side -arrow- .
- 1.3. Turn the headliner anti-clockwise and place the front edge of the headliner on the center console.
- 1.1. Two people are needed in order to guide in the headliner.
- Two people must now lift up the headliner and clip in the fastening clips at the rear -arrow- .
- Screw in and tighten fastening screws -1- in the roof console area.
- Install sun visor holder.
- 4.1. Position sun visor holder -arrow- .
- 4.2. Tighten fastening screw → Tightening torque: 5.5 Nm (4 ftlb.) .
- 4.3. Close the cover until it engages securely -arrow- .
- Fit rubber door seal -1- on the body flange close to the headliner -arrows- .