LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 70 - Linings, Insulation -- 911 CARRERA (991) >> WM 706319 Removing And Installing Handle (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Installing Handle

Installing Handle

  1. The handle is installed in reverse order to removal.
  2. Screw in fastening screws and tighten to the specified tightening torque. → Tightening torque: 2.2 Nm (1.5 ftlb.)+/-0.2 Nm (+/-0.2 ftlb.) 
scientia non olet · About LEMON Manuals