Glazing, Window Control
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for door window glass | With special tool | Tightening torque | 5 Nm (3.5 ftlb.) | +/-0.9 Nm (+/- 0.5 ftlb.) | |
|
Securing door window |
|||||
| Fastening screw for door window | Directly at the screw | Tightening torque | 12 Nm (9 ftlb.) | +/-1.8 Nm (+/- 1.5 ftlb.) | |
|
Securing door window |
|||||
| Fastening screw for rear side window | Special tool | Tightening torque | 10 Nm | ||
|
Loosening side window |
|||||
| Power window motor to window lifter | Tightening torque | 4.7 Nm (3.5 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | ||
|
Removing power window motor |
|||||
| Fastening nut for power window | Tightening torque | 9.7 Nm | +/-0.9 Nm | ||
|
Screwing off fastening nuts |
|||||
| Fastening nut securing side window to B-pillar | Tightening torque | 9.7 mm (7.5 ftlb.) | |||
|
Loosening fastening nuts |
|||||
| Fastening nut for rear power window | Tightening torque | 17 Nm | |||
|
Loosening fastening nut for power window |
|||||
| Fastening screw for rear side window | Tightening torque | 9.7 Nm | |||
|
Removing rear side window |
|||||