Installing Center Console
Information
Check that it is routed correctly and that the electric lines are seated correctly.
Information
Make sure that the linings and trims are seated accurately.
- Installation is performed in reverse order to removal.
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening Screw On Center Console At The Top On The Tunnel | Tightening Torque | 9.7 Nm | +/-0.9 Nm | ||
| Fastening Screw On Front Center Console | Tightening Torque | 3.2 Nm | +/-0.3 Nm |