Installing Additional Brake Light

→ Switch off electric power to drive motor.

→ Make sure it does not switch on again.

→ Check that there is no electric charge.

1. Connect -2-  electric plug connection -1-  to the additional brake light -A-  until it clicks into place -2-  .
   Fig 1: Connecting Brake Light Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Insert additional brake light into the rear spoiler and push in until the additional brake light engages securely -arrows-  .
   Fig 2: Inserting Brake Light

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.