Removing Tail Light
WARNING:
Electrically moved components
- Danger of limbs being trapped or severed
→ Switch off electric power to drive motor.
→ Make sure it does not switch on again.
→ Check that there is no electric charge.
- Extend rear spoiler.
- 1.1. Switch on ignition.
- 1.2. Open the rear spoiler completely by pressing the button in the center console.
- 1.3. Switch off ignition and remove ignition key.
- Carefully unclip cover on the mounting bracket using a plastic wedge as shown -arrow- and remove it.
- Unscrew fastening screws -1- for the tail light and pull the tail light out as far as required until the connector is accessible -A- .
- Release and disconnect electric connector for the tail light.