Remove Headlight Control Unit (Centrally)

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

1. Screw off fastening nuts -1-  .
2. Remove headlight control unit (centrally) -2-  .
   Fig 1: Removing Headlight Control Unit (Centrally)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release -a-  clip -1-  , swivel to side -b-  and remove electric plug connection from headlight control unit -2-  .
   Fig 2: Disconnecting Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.