Checking Condition
Tires are a safety element that meet the demands placed on them only if they have the correct air pressure and sufficient tread depth.
Information
The >> Tire pressure << display is for information purposes only.
- Tire pressure settings can only be entered according to the values in >> Filling information <<.
- Check condition and tire pressure.
Valve caps protect the valve from dust and dirt and therefore from damage.
- Always screw on valve caps tightly and replace missing valve caps.
For vehicles with Tire Pressure Monitoring (TPM), which can be identified by aluminum valves, the tire pressure must be adjusted according to the >> Filling information << on the multi-function display. To do this, select >> Main menu >> Tire pressure >> Filling information <<. Adjust the deviation values so that they range from 0.0 bar to +0.1 bar. Fill the tires according to the display using the tire-inflating device. Example: If the tire pressure display >> Filling information << shows - 0.2 bar, 0.2 bar pressure must be added.
Information
The >> Tire pressure << display is for information purposes only.
- Tire pressure settings can only be entered according to the values in >> Filling information <<.
Due to the pressure and temperature relationship (approx. 0.1 bar/10° C), the actual pressure values displayed under >> Tire pressure << on the multi-function display, or on the pressure gauge of the tire-inflating device, can deviate from the required pressure specified at 20° C on the tire pressure plate if the air temperature in the tire is significantly above (higher values) or significantly below 20° C (lower values). Changes in tire pressure are displayed after max. 1 minute under >> Filling information << after switching on the ignition. A series of dashes (-.-) will appear instead of the tire pressure during this time.
For vehicles with Tire Pressure Monitoring (TPM), always use plastic valve caps. Plastic valve caps protect against dust, dirt and humidity, and therefore against damage (corrosion).
Tires are a safety element that meet the demands placed on them only if they have the correct air pressure and sufficient tread depth.
- Modified handling behavior can cause accidents and major material damage.
→ The air pressure must never fall below the values specified (these are minimum pressures).
→ The tread depth must never fall below the minimum value.
→ A visual inspection of the tires (for cracks, pricks, bulges in the sidewall and/or foreign bodies) must be carried out.
Information
The currently applicable air pressure values and comfort tire pressure values in the individual countries can be found in the Manufacturer Approval >>Approved wheels and tires<< in the >>Manufacturer Approvals<<, Group 4.
Tire pressures apply to all-season, winter and summer tires. They also apply only to tires approved by Porsche.
Part load: The tire pressure is specified for a load of up to 3 people + 21 kg of luggage.
The collapsible spare wheel is an optional extra (tire sealant comes as standard).