| Lower wishbone to supporting frame, front (caster eccentric) |
M12 x 1.5 thread (screw and nut can be re-used!) |
Tightening torque |
50 Nm (37 ftlb.) |
+120° |
|
| Lower wishbone to supporting frame, rear (camber eccentric) |
M12 x 1.5 thread (screw and nut can be re-used!) |
Tightening torque |
50 Nm (37 ftlb.) |
+120° |
|
| Lower wishbone to wheel carrier (taper bushing) |
M14 x 1.5 thread |
Tightening torque |
130 Nm (96 ftlb.) |
|
|
| Lower wishbone to spring strut |
M12 x 1.5 thread |
Tightening torque |
90 Nm (67 ftlb.) |
+120° |
|
| Steering spoiler (air guide) to lower wishbone with take-up hole |
M6 x 50 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|