Anti-Roll Bar/Connecting Link

Fig 1: Identifying Conventional Connecting Link

G09807206

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
1 - Anti-roll bar mount to anti-roll bar ball pin, conventional	M12 x 1.5 thread - New type, conventional	Tightening torque	100 Nm (74 ftlb.)
2 - Anti-roll bar mount to spring strut, elastomer joint, conventional	M12 x 1.5 thread - New type, conventional	Tightening torque	40 Nm (30 ftlb.)	+90°

Fig 2: Identifying PDCC Connecting Link

G09807207

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
1 - Anti-roll bar mount to spring strut, ball pin, PDCC	M12 x 1.5 thread - New type, PDCC	Tightening torque	50 Nm (37 ftlb.)	+30°
2 - Anti-roll bar mount to anti-roll bar, elastomer joint, PDCC	M12 x 1.5 thread - New type, PDCC	Tightening torque	40 Nm (30 ftlb.)	+90°
Pressure line to anti-roll bar	M14 x 1.5 thread	Tightening torque	28 Nm (21 ftlb.)
Clip to anti-roll bar	Screw	Tightening torque	5 Nm